AR9100 Oil Additive
AR9100 Oil Additive
AR9100 Oil Additive
AR9100 Oil Additive

AR9100 Oil Additive

Regular price $89.90 Sale price$79.90 Save $10.00
/
  • Free U.S. shipping on orders over $40
  • In stock, ready to ship
  • Inventory on the way

AR9100 Friction Modifier protects and extends the life of engine components by forming a solid boundary lubricating film, resulting in improved power, smoother idling, quieter vehicle operation and extended oil drain intervals.

AR9100 is suitable for use in all gas and diesel engines and eliminates cold start issues caused by HEUI injector misfires in 6.0L & 7.3L Power Strokes.

  • Increase power and response
  • Anti-wear, extreme pressure and anti-corrosion protection
  • Protect engine during cold starts
  • Clean and prevent sludge/varnish deposits
  • Extend oil drain intervals

⭐ Read AR9100 Reviews

Friction can cause a number of problems in an engine. The most noticeable include excess heat, power loss, noise, vibration and poor fuel efficiency. These issues lead to increased wear and tear, reduced performance and an uncomfortable driving experience.

AR9100 forms a film on surfaces to provide anti-wear protection through the entire oil cycle. In ASTM testing, AR9100 reduced wear by 43%.

The lubricating film AR9100 forms provides extreme pressure protection and is more resilient than soft films of zinc based anti-wear additives (ZDDP).

In ASTM testing used to evaluate the extreme pressure properties of lubricants and coatings, AR9100 dramatically extended the load-carrying ability of a branded lubricant from 3,964 lbs to over 4,500 lbs.

Sludge and varnish build up in the oil system and can clog passages, reduce the effectiveness of the oil and cause damage to the engine. Mechanical seals and surfaces, valces, oil filters and thrust-bearing pads are among the areas likely to be affected by deposits.

The organic ester package in AR9100's formulation dissolves existing deposits safely to restore power, performance, fuel economy and protect the engine. AR9100 also contains antioxidants which reduce the rate of oil breakdown and help to prevent the formation of sludge.

Deposits and wear in HEUI injectors (Power Stroke 6.0L & 7.3L) cause the injector to become stuck due to static friction, or 'stiction', and can prevent the injector from firing. This causes hard starting, rough idling, smoking, reduced power and response until the engine is warmed up.

Add a 16oz bottle of AR9100 to every oil change to eliminate cold start issues. AR9100 will clean out HEUI injector deposits and create a friction reducing film inside the injectors to ensure all eight injectors fire every time.

For engines, limited slip differentials and motorcycles, use 1.2 oz of AR9100 per quart of conventional or synthetic oil.

For all Power Strokes, use 16 oz of AR9100 every oil change.

For gear oil, hydraulic oil and power steering fluid, use 3.2 oz of AR9100 per quart.

How to treat your engine with AR9100.

We offer a 100% Money Back Guarantee if AR9100 does not resolve stiction issues in 6.0L and 7.3L Power Strokes after 100 miles.

Click here to read the AR9100 Data Sheet which includes test results and more information on how the product improves engine performance in all applications.

RESTORE AND PROTECT ENGINE PERFORMANCE

Add AR9100 Friction Modifier to Your Oil

• Forms a solid boundary lubricating film that improves performance, offers extreme pressure protection and protects engines, gearboxes and hydraulic systems

• Reduces friction, improving efficiency and power. With less friction the system will run smoother, more quietly and develop less heat

• Extends oil drain intervals by improving the oxidative stability of engine oil

• Gently removes and disperses any sludge, varnish and carbon deposits that have built up in the engine

• AR9100 is suitable for use in all gas and diesel engines including modern vehicles, classic cars, motorcycles, high mileage vehicles and four-stroke outboard motors. If you have questions about your application, please email tech@archoil.com.

POWER STROKE STICTION FIX

AR9100 Friction Modifier solves misfire and cold start issues in 6.0L & 7.3L Power Strokes

Symptoms of Stiction

Deposits and wear in HEUI injectors cause them to become stuck. This prevents the injectors from firing causing 6.0l and 7.3l Power Strokes to suffer from hard starting, rough idling, reduced power and response, bucking and smoking.

Click here to learn more about stiction

Treat with AR9100

Add AR9100 to every oil change to eliminate hard start and drivability issues caused by HEUI injector misfires in 6.0l and 7.3l PowerStrokes. AR9100 cleans out HEUI injector deposits and creates a friction reducing film to ensure all eight injectors fire every time.

Click here for directions on treating your engine with AR9100

Problem Solved

Engine oil is exposed to very high temperatures and pressures within the Spool valve ('poppet valve' in 7.3l) of HEUI injectors. The oil degrades and forms deposits that cause excessive wear, creating static friction, or 'stiction', which can prevent the injector from firing.

A blend of esters combined with our additive package removes deposits and forms a friction reducing solid boundary lubricating film on the bore of the 'spool valve'. By removing deposits and reducing friction, AR9100 eliminates stiction issues.

100% Money Back Guarantee

Get your money back if AR9100 does not resolve stiction issues in your 6.0L or 7.3L Power Stroke within 100 miles of driving. Simply call or email us for a no-hassle refund.

BUY AR9100
"Archoil is the real deal"

The next morning, following a 15-degree night during which the truck once again sat outside, it fired right off and idled smoothly. Seeing this F-350 go from a cold-blooded, rough-running basket case to a truck that ran as smooth as it did the day it left the dealership definitely made believers out of us. Archoil is the real deal.

- Diesel Power Magazine // Read the full article

COMPLETE ENGINE RESTORATION

DIESEL KITS

Restore, protect and maximize your performance and save up to 22%

AR9100 FAQs

To maintain the products benefits we recommend adding AR9100 to every oil change.

Yes, but if AR9100 is added to used oil which will be drained soon it would need to be replaced at the next oil change. If an oil change is coming up consider waiting until then to add AR9100 so it can be used for a full oil drain, or consider changing your oil when you add AR9100 so it goes in with fresh oil.

When adding AR9100 to used oil, make sure there is room by draining some oil out beforehand. Make sure not to add AR9100 to an already full crankcase, doing so will exceed your engines maximum oil capacity and can cause engine damage. If your dipstick shows that the oil is below the maximum mark, you can usually add AR9100 without draining oil out.

For all Power Strokes remove ½ a quart (16 oz) of oil from the engine before adding a 16 oz bottle of AR9100. If you are adding AR9100 during an oil change use less oil so there is room.

Yes. AR9100 is suitable for use in both synthetic and conventional engine oil.

No, We don't recommend using AR9100 in automatic transmissions.

No. AR9100 will pass through fine oil bypass filters without causing issues as the average particle size of AR9100 is 100 nanometers (1/10 of a micron).

The Magnuson-Moss Warranty Act allows consumers to use additives of their choice without voiding their warranty except for instances where specific additives have been noted as incompatible.

AR9100 should be added to new vehicles after completing their break in cycle in accordance with the owner's manual.

Yes, use 1.2 oz of AR9100 per quart of engine oil in motorcycles with wet clutches. Check the owner's manual beforehand to ensure it does not specify against the use of friction modifiers.

Customer Reviews

Based on 624 reviews
96%
(599)
3%
(18)
1%
(5)
0%
(2)
0%
(0)
L
Lance R. (Murrieta, CA, US)
Decent but I was hoping for more

I have a 2006 F250 6.7L deisel that has over 166k mi. Hard starts etc. After seeing the promos I was pumped. After putting it in I was happy because it does seem to help some but not as much as I expected. I’m hoping the next oil change will be even better. We’ll see.

J
John B. (Cottonwood, AZ, US)
Stroken

98 SuperDuty starts better than it ever has.

c
clifton j.j. (Maxton, NC, US)
i think it a good product

I put it in 6.7 ford diesel when change oil I got 400 miles on the oil change i can tell different in engine and the oil is not black color is brown color I think is clean engine of the black to brown color oil

F
Francesco P. (Detroit, MI, US)
1997, 7.3

Helped with cold start. Way less smoke, smelt like it's running cleaner, More power for sure. Buying my second order now. With fuel cleaner and fuel additive.