AR6200 Fuel Treatment

Everyday Fuel Treatment Restores Fuel Quality and Improves Lubricity

You Save:

Archoil's AR6200 Fuel Treatment brings more power and response at every fill-up while protecting your fuel system and improving fuel efficiency.

AR6200 is suitable for use in both diesel and gasoline.

AR6200 is highly concentrated - a 16.9oz bottle treats 500 gallons of fuel.

AR6200 Data Sheet

Upgrade Your Fuel

Combustion Modifier: A more complete combustion improves efficiency, power and response
Lubricant: Protects fuel pump and injectors from wear and failure, lubricates upper cylinder
Dispersant/Detergent: Helps dissolve sludge and other fuel system deposits. Restores degraded fuel

Stabilizer: Enables extended fuel storage
Corrosion Inhibitor: Protects the fuel system from corrosion
Biocide: Eliminates microbial growth (algae, bacteria)
Demulsifier: Improves water separator effectiveness

In addition to the universal benefits listed above, AR6200 users will also notice further diesel or gasoline specific improvements.

Diesel Benefits

AR6200 addresses issues associated with poor quality diesel, including the accumulation of performance-robbing soot, to restore and maintain vehicle performance. AR6200 increases cetane and many users will also notice an increase in fuel economy (MPG). The DPF will be kept clean, resulting in less frequent regens. Turbo and emissions systems will also be kept free from excessive soot.

Gasoline Benefits

AR6200 is also beneficial in gasoline vehicles and small equipment. Adding the fuel treatment prevents ethanol degradation/corrosion, combats knocking/pinging and improves gasoline's resistance to pre-ignition. AR6200 is also great for classic vehicles which were designed to run on leaded fuel and prevents issues when storing seasonal equipment.

Diesel Tech Magazine

"You can add Diesel Tech magazine to the long list of testimonials as we're now believers in Archoil too.

"Improved fuel economy, smoother running engine and no issues with cold starts."

Diesel Tech Magazine

Read the full Diesel Tech Article

How it Works

More complete fuel burn

AR6200 will ensure a more complete fuel burn which improves fuel efficiency, power and response. A more complete fuel burn also means less soot/carbon emissions are produced which keeps the engine, turbo, and emissions systems (EGR, DPF, catalytic converter etc.) free from soot deposits.

Keeps diesel particulate filter clean

Due to reduced soot emissions, vehicles equipped with a Diesel Particulate Filter (DPF) will benefit from reduced frequency and length of DPF regeneration, which results in big fuel efficiency gains. When the DPF captures less soot, much less fuel is needed to burn it off, and there is less exhaust backpressure which reduces engine efficiency.

Protects fuel system

Detergents will keep your fuel system clean preventing the formation of power/economy robbing deposits and a lubricity improver will prevent wear in all fuel systems including the most modern high pressure fuel systems. AR6200 will also combat corrosion and microbial (bacteria, algae) growth in the fuel tank as well as improve the effectiveness of water separators/filters equipped on diesel vehicles.

Fuel stability and system protection

AR6200 will maintain fuel stability, permitting long term fuel storage by preventing fuel from degrading and forming sludge and varnish which does not burn readily and can plug fuel filters and injectors if left untreated. A powerful dispersant will dissolve sludge and varnish allowing it to pass through your fuel system and burn completely.

AR6200 Frequently Asked Questions

What's the difference between AR6200 and AR6400 (D or G)?

A small amount of AR6200 Fuel Modification Complex is added to every tank of fuel to boost performance, ensure fuel quality and protect the fuel system from wear, deposit formation, corrosion and microbial growth. AR6400 (D or G) is designed to be added in large doses to remove existing deposits from your fuel system and engine. For example, a 16.9 oz bottle of AR6200 treats up to 500 gallons of fuel and a 16 oz bottle of AR6400 (D or G) treats up to 25 gallons of fuel.

Does AR6200 help prevent issues with ethanol?

AR6200 will help to prevent some issues with ethanol fuels including issues with deposit formation and fuel stability. AR6200 will also help prevent microbial growth and corrosion which can occur in the presence of ethanol.

Does AR6200 offer cold weather anti-gel protection?

No AR6200 does not offer any anti-gel protection, but you can use AR6200 at the same time as an anti-gel additive if you would like.

Is AR6200 compatible with other additives?

To check if AR6200 is compatible with another fuel additive, locate the SDS sheet and look in section 10 'Stability and Reactivity' for incompatible substances. AR6200 is incompatible with strong oxidizing agents and acids. If the product in question is incompatible with alkaline materials according to the 'Stability and Reactivity' section on the SDS sheet then it will not be compatible with AR6200 which is a strong base. You can also email alex@archoil.com for review. Most fuel additives reviewed are compatible with AR6200.

What is the shelf life of AR6200?

AR6200 will be stable indefinitely if kept away from sources of heat and sunlight.

Outstanding Product

With Archoil Fuel Treatment my injectors are quieter and fuel consumption improves as much as two miles per gallon when running with light loads. Ford F-250 6.0L with 228,000 miles.

First try

Saw this product on the Jay Leno's Garage site; thought I'd give it a try.. I have run the required first three treatments as required, and my 4.0 liter Ranger has improved 3 miles per gallon already.. hope to use in my 62 Nova starting this next week

Great Service!

Excellent product used in my 7.3 2001 Powerstroke with over 210,000 miles and, so far, still going strong!

Speedy Quick!

Thanks for getting my additive to me quickly. I always enjoy ordering direct especially when you guys are on the ball when it comes to shipping. Thanks!